Lexmark 5000 Protocol
There are two types of commands in the 5000's repertoire:
Escape asterisk commands commencing with the two-byte
sequence `0x1b 0x2a' (Escape Asterisk). These sub-divide into
The third byte is `0x6d'; the ASCII 'm'.
The third byte is `0x7'; the ASCII BEL.
The third byte is '0x3'; the ASCII ETX or
This is the vertical paper movement
command, followed by a two-byte relative move.
The third byte is '0x4'; the ASCII EOT or
This is the swipe print command,
followed by a four-byte total command length (including
header), and the remainder of the swipe command.
A5 commands commencing with the byte `0xa5'.
The second & third bytes are the MSB and LSB of the length
of the remainder of the command.
Printheads & nozzle
A discussion of the configuration of the nozzles in the
printheads of the cartridges. Essential for an
understanding of the swipe command.
& paper movement commands
Very little is known about the specific functions of
individual initialisation commands. In general, a
collection of these appears at the beginning of each page.
There are only two known paper movement commands, so this
bit is easy.
The swipe command
The heart of the driver is the swipe command, which does
almost all of the work.
Peter B. West
"Lord, to whom shall we go?"
Home away from
Last modified: Mon Nov 8 00:19:25 EST 1999
Tue 19th Oct 1999.